EvoX Haltech Elite 1500 ECU Kit

OFF ROAD USE ONLY - Racing Applications
 
Look no further than this kit for the most comprehensive turn key solution for changing the engine management in your EvoX GSR. Not just a patch harness and an ECU, the complete base kit includes:
 
Elite 1500 ECU
Plug and Play ECU Patch Harness
Expansion Connection for Additional Sensors
ECU Mounting System
Patch Mounting System
CAN Gateway Module
OEM Vehicle Base Map - 100% Base tuned EvoX Map is included at no charge! Options for custom base map, remote support or tuning also avialable!
Complete Color Install Guide - ECU Base Kit TAKES JUST 30 MINUTES TO 1 HOUR to install pending kit options and experience level. 
Laminated Color Expansion Card - Covering all your expansion wiring options and install info.
NO DASH WARNING LIGHTS! 100% trouble free operation!
HUGE Selection of plug and play additional sensors and features offered with purchase or to add on at a later time.
 
Some features enabled in the INCLUDED base map on the ecu (many more features can be enabled):
-Speed Density (Can remove MAF sensor, run VTA bov, etc)
-Rolling Anti-Lag (aka: Rolling Boost)
-Anti-Lag Launch Control
-Flat foot shifting
-Cruise Control
 
Avialable open I/O for additional sensors and control:
Analog Voltage Inputs Qty: 2 - Expansion Connector on Patch Harness (Pressure Sensors)
Sync Pulse Inputs Qty: 1 - Expansion Connector on Patch Harness (Flex Fuel Sensor or Pressure Sensors, etc)
*Additional SPI can be utilized if exhaust cam has MIVEC deleted with our cam sensor harness*
Digitaly Pulsed Output Qty: 1 - OEM 2nd Boost Control Solenoid (PNP 2nd pump control with our harnesses)
Digitaly Pulsed Output Qty: 1 - Expansion Connector on Patch Harness
 
With current open I/O on a factory or modified vehicle, the typical sensor package most add to the kit is: Fuel Pressure, Oil Pressure and Flex Fuel Sensor into Expansion Connector. These all being optionally sold as 100% plug and play kits as well. Wideband is preferred to use Haltech CAN Wideband as it will not consume an open input, however AEM gauges and such can be used via analog input. Outputs we typically remove any hobb switches present if so and control the 2nd pump with the ECU via plug and play harness options as well. 
 
Optional I/O Expansion is 100% Plug and Play - Will add 4 additional Analog Voltage Inputs.
 
The Elite 1500 features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide.
 
Mounting Options:
Engine Bay Mounted Kit - This kit is even easier to install however limited by intake and heat shield fitment. This kit was designed to be used with an ETS Turbo kit - Removing the MAF Housing and Shield, installing a direct 4" Filter to the intake pipe. This kit may also fit other intake options, however if you are doubtful look into the fender mounted kit.
Fender Mounted - This installs the ECU just below the driver's headlight. Will clear all intakes and all known major lower intercooler piping kits. HIGHLY recommended that you have all undertrays and fender liners in 100% condition to premote ECU general protection (ECU is waterproof). Extended tuning cable may be desired in this ecu location.
 
 
 
 
 
 
 
 
 
 
 
Kozmic components carry a 6 month limited warranty from time of purchase, sensors and electronics are under manufacturer warranty. IMPORTANT EMISSIONS NOTICE:In many states, it is unlawful to tamper with your vehicle's emissions equipment. Kozmic and Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.